Saturday , April 4th 2020
    Smart Home Automation & Security Products Reviews & Recommendations

Electop 5 Inch CCTV Tester AHD TVI CVI Coaxial HD Video Monitor Tester Analog Video Test UTP Cable Test VGA/HDMI Input DC12V Output Camera Tester

Product Features:

    Product Funtions: -Video signal testing Vedio monitor tester, High-resolution 5.0 inches 800(RGB)x480 wide viewing angle display, Viewing angle larger, more intuitive and easy to display the camera image quality. Support PAL/NTSC standard video signal. Multi-format video OUT port image generator, sending a variety of standard (e.g. PAL, NTSC) color…
Price as on: 2018-12-30 22:23:26
169  

Product Description

Product Funtions:
-Video signal testing
Vedio monitor tester, High-resolution 5.0 inches 800(RGB)x480 wide viewing angle display, Viewing angle larger, more intuitive and easy to display the camera image quality. Support PAL/NTSC standard video signal.

Multi-format video OUT port image generator, sending a variety of standard (e.g. PAL, NTSC) color graphics section

– Audio testing
Test the audio input from pickup devices. Connect the tester and pickup device with the audio cable.

-Enhanced network cable testing
By UTP CABLE TEST port on the meter, you can test the connection of network cable.

– VGA/HDMI input
Support VGA/HDMI 1.1 Compliant Digital input, once connect VGA/HDMI video, please switch selector to select HDMI or VGA mode. The maximum resolution is 1920×1440

– CVI camera test
HD video surveillance testing, support 1MP, 2MP, 3MP, 4MP. When CVI signal input, the tester will display the CVI camera image.

– TVI camera test
HD TVI video surveillance testing, support 1MP, 2MP, 3MP, 4MP, 5MP. When TVI signal input, the tester will display HD TVI camera image.

– AHD camera test
HD video surveillance testing, support 1MP, 2MP, 3MP, 4MP, 5MP. When AHD signal input, the tester will display the AHD camera image.

The tester cannot automatically choose TVI, CVI, AHD, you need to choose Manually.

– LED lamp
It is useful for the engineer to install and maintain security system at night. LED On/Off pressing button, easy to operate.

-The battery graphic display
The tester has advanced power control and protection circuit, low-power energy-saving, 3 to 4 hours on a single charge, can be used normally for 11 hours.

-PTZ controller -DC12V 1A output power -Image generator etc.

Product Features

  • Developed for the on-site installation and maintenance of Analog Camera (CVBS) and HD Coaxial Camera, having TVI,CVI, AHD. (NOT Support IP Camera).
  • High-resolution 5.0 inches 800 (RGB) x480 wide viewing angle display, Viewing angle larger, more intuitive and easy to display the camera image quality. Support PAL/NTSC standard video signal
  • Video monitor tester built-in Pelco-D / P PTZ control protocol,etc. , through its own RS485 interface, the user can control the PTZ up, down, left, right rotation, and adjust one machine zoom, focus,aperture size. Multi-format video OUT port image generator, sending a variety of standard (e.g. PAL, NTSC) color graphics section
  • Power the camera with DC12V (1A) power output from the tester. It is helpful for demo and testing when the power supply is not available.
  • Rechargeable: Built-in 18650 2600mA battery, after charging 3-4 hour, working time lasts 11 hours